Nuvo NV-T2FX Bedienungsanleitung

I. Installing the NV-T2 Dual TunerStereo Audio ConnectionsEach tuner has two audio output jacks. One is a stereo RCA connection, and the other is a s

IR Pass-ThruThe mini jack labeled “IR pass-thru" mini connection is used for connecting forwarded IR signals to an audio component connected to t

AM/FM Antenna InputThe T2 ships with a proprietary active AM/FM antenna. This antenna is designed to work only with the NuVo T2 series AM/FM tuners.

Page 12Proper Location of the XM AntennaLocation of the XM antenna is critical to proper performance. There cannot be any obstructions between the ant

II. Front Panel Menu Controls AM/FMThe T2 has many settings available in the menus. This allows for specialized set up options for tuner operation. Th

The following menu selections are not necessary for standard tuner operation, but do provide a deeper level of control for those who need it. When you

Audio Settings These selections are intended for AM, FM and XM stand-alone applications. They should be left at default settings for NuVo audio syste

AUX InputDisable/Enable: The T2 has an auxiliary audio input that allows access through either of the tuners to an additional audio source. To use th

Page 17III. Front Panel Menu Controls XMMost menu functions are identical to the AM/FM tuner with some exceptions. The menu functions specific to XM r

IV. Stand-alone Front Panel Use of the T2Tuning a Desired Station: Pressing the Select knob cycles through the tuning modes.Step Tune Mode: Each of t

ENGLISHDangerExposure to extremely high noise levels may cause a permanent hearing loss. Individuals vary considerably to noise induced hearing loss b

Actual use of these data fields is not regulated, and they may vary significantly in content between stations. If you choose not to have RDS informati

IV. Using the T2 with the Concerto NuVoNetSetting Up the Tuner for NuVoNetThe T2 must be set for one of the Concerto source inputs 1-6. This can be do

Making the Connection Prior to connecting to NuVoNet, the Concerto must have the correct Configuration version downloaded with the T2 representing tw

T2 AM/FM Configuration SoftwareBasic setup and operation of the T2 is easily done from the front panel, the included T2RC3 remote, or the Concerto Dis

2.2 Regional Setup2.3 Brightness2.4 Auto-OnPage 232.2 Regional Setup: Depending on your geographic location, the tuner needs to be set for the proper

3.3 Rename Bank3.4 Erase Bank3.2 Add BankPage 243.2 Add Bank: If you want to add a bank of 10 presets, the “Add Bank “ button will bring up a window

4.1 Custom Regional SetupPage 254.1 Custom Regional Setup: Some countries operate at a tuning standard outside the four preset regions. The Custom se

4.5 AUX InputPage 264.5 AUX Input: The T2 has an additional input that allows an external device to be controlled through the T2's IR pass throu

Page 276.1 Categories Tab6.2 FM Freqs: This tab lists all the available frequencies within the FM band. When highlighted, the Frequency Information o

Page 28 7.2 Successful Download: When the download is complete a final window will appear indicating that all the information has downloaded

FRENCHDURE EN HEURES PAR JOUR 8 6 4 3 2 1INIVEAU SONORE CONTINU EN dB 90 93 95 97 100 103DangerL‘expositi

The song name displayed on my Display Pad does not match what I'm hearing.When I use Seek or Scan tuning,

NV-T2DF SpecificationsFM Section AM SectionTuning Range 87.5 to 108 MHz Tuning Range 522 to 1720 kHzIF Frequency 10.7 MHz IF Frequency 450 kHzUsable S

NuVo Technologies 4940 Delhi Pike Cincinnati, Ohio 45238, USA www.nuvotechnologies.com P

GROUNDCLAMPSGROUNDCLAMPSELECTRICSERVICE ENTRANCEELECTRICSERVICE ENTRANCEANTENNA DISCHARGE UNIT NEC SECTION810-20GROUNDING CONDUCTORSANTENNA DISCHARGE

Congratulations on your purchase of the NuVo T2 dual Tuner. With the T2 Dual Tuner, broadcast music enters the twenty-first century. Finally you can

NV-T2DF Wiring DiagramDiagram is shown with the NuVo Concerto System and NuVoNet.NV-T2DF Package Contents:1 NV-T2DF Dual AM, FM, WX Tuner 1 NV-T2FAA A

Front Panel 1. Stand-by LED: This LED (Light Emitting Diode) indicates that the T2 is plugged into an AC power source.2. Remote Sensor: This

Back Panel 1. Antenna Input: Coax “F” connector brings in the signal input from the NuVo NV-T2FAA AM/FM or the NV-T2XAA XM active antenna (pg

NV-T2RC3 Remote Control 1. Power: The power button turns the selected tuner on and off. 2. Scroll Buttons: These buttons are the equivalent